- Lathe & Milling Machine
- Non-destructive Testing
- Accessory
- Rebar Tying Machine
- Surveying Instrument
- Accessories
- Exhaust Gas Analyzer
- Well Drilling Rig
- PIPE FITTING
- PVC
- GALV
- Valves
- Electric Hoist
- Cut-off Machine
- Visible Spectrophotometer
- Infrared Oil Spectrophotometer
- Fluorescence Spectrophotometer
- Paint Sprayer
Large Horizontal Lathe
CD Series Large Horizontal Lathe
Cooling and Chip Disposing System
Hydraulic system
The system can be effectively and rapidly performed with hydraulic braking. For lubrication, it is the same system used in machine head. Main hydraulic elements are all produced by Taiwan ChaoTian of good quality and high working reliability.
Cooling and chip disposing system
The standard configuration of the machine will adopts chip pan for chip disposal. The cooling box will be separated from the main set to avoid the machine accuracy being affected by heat caused by cutting. The system will adopt home-made cooling pump, and the cooling box will be installed in trench.
|
ITEM |
CD61125 |
CD61140 |
CD61160 |
CD61180 |
CD61200 |
|
Max.weight of workpieces |
18T | ||||
|
Max.lenght of workpieces |
5000-10000mm( when sleeve of tailstock out 250mm long) | ||||
|
Width of the machine bed |
1100mm | ||||
|
Speed of spindle |
3-136 rpm ,12steps | ||||
|
Max.torque |
2700kgm | ||||
|
Motor power |
30kw,380V 50Hz 1470rpm | ||||
|
Swing dia.over bed |
1250mm |
1400mm |
1600mm |
1800mm |
2000mm |
|
Swing dia.over tool rest |
880mm |
1050mm |
1250mm |
1450mm |
1650mm |
|
Section of cutter arbor |
45¡Á45mm | ||||
|
Spindle diameter |
Front 240mm | ||||
|
Code for spindle nose |
A2-15 |
A2-15/A2-20 |
A2-20 | ||
|
Spindle tapered hole |
Metric 140 | ||||
|
Dia. of spindle hole |
100mm | ||||
|
Stroke of compound rest |
300mm | ||||
|
Stroke of cross slide |
650mm |
750mm |
850mm |
950mm |
1050mm |
|
Longitudinal rapid moving speed |
3800mm/min | ||||
|
Cross rapid moving speed |
1900mm/min | ||||
|
The number of feed of tool rest |
48 | ||||
|
Feed range of tool rest |
Longitudinal: 0.057-12.726mm/r Cross: 0.027-6.096mm/r | ||||
|
Dia.of tailstock sleeve |
240mm Self-rotating spindle centers are equipped inside | ||||
|
Tapered hole of tailstock centers |
80; 1:7 | ||||
|
Tailstock stroke |
250mm | ||||
|
The number of threads |
Metric 46 |
Range 1-224mm | |||
|
BSP 46 |
28-1 Tooth/inch | ||||
|
Module37 |
0.25-56mm | ||||
|
Total power of the machine |
34 kw | ||||
|
Supporting range of steady rest |
200-550mm | ||||
|
Overall dimension of machine: (5m center distance)L¡ÁW¡ÁH |
8600*2300*1770 |
8600*2300*1850 |
8600*2300*2120 |
8600*2300*2320 |
8600*2300*2765 |
